Although we had done renovations before, we were relatively new to the bathroom fittings arena and with the number of things that we shopped for and bought, I should highlight some of the better deals. A long post, this time.
KitchenMost places will sell you a package of a hob and hood with a matrix of prices. These are so common and popular that they are relatively straight forward and it's difficult to really deviate on pricing. Also, contractors are most familiar with these brands, which helps in the installation and ducting process. At the various Balestier outlets that we visited, we were quoted about $700 for a hood and hob combination. This can go down as low as $500 and as high as $1800, depending on the brand, the shape of the hood and whether the hob is gas or induction (induction hoods are seldom less than $1100). Familiar brands would be ones like Brandt, Rennai, Turbo, Teka and Electrolux.
Some of these sets can also be upgraded with an oven, usually a 60cm (and here the brands are far more diverse). Fridges, dishwashers, dryers and washers are generally bought seperately, with most of these appliances costing anywhere from $600 onward. One good store that we went to was Rina Electric, at Shaw Center, they had the requisite high-end items like Miele ovens and Quasar hoods but they also had a good Borsch set of hood, induction and gas hobs, oven, fridge, dishwasher, washer and dryer for $9000, or Brandt set for $8000. This was not such a bad deal if we considered that even on mainstream packages, the pricing would also have added up to similar.
I'm a little biased when it comes to kitchen sinks, for me, the bigger the better and I like them straight edged, that is, industrial-boxy and with 90 degree angles, as opposed to the moulded round edges that are more common. I'm also picky about kitchen sink taps because I want them to have enough reach to come over the sink and wash out the corners of a basin, have clear hot and cold directions and be able to swivel without causing gaps in the fitting joints . (What can I say, I use my kitchen sink a lot and I grew up with a kitchen sink that moulded because of the frequent backsplash). The best I saw were Franke sets that had beautiful deep straight-edged sinks and lovely fluted bend taps from $300-600 at Hong Soon and some Rox sets at Hoe Soon for similar price. For a large sized basin, thicker steel and good design, be prepared to pay at least $399+.
If you are looking for a really bargain deal, I did find $80 double-kitchen sink inserts in Hong Soon and pretty nice $80 double-kitchen sink from Spain online. The contact is Thomas Tang 67461909 whose company bought a whole bunch of items for a development and has leftovers. (I discovered this by looking online for second-hand, resale kitchen or bathroom appliances. This company also has tap fittings from Spain, very heavy-duty bathroom and kitchen mixers in regular chrome and goldplate chrome for $80 each.
WCs and BasinsThere seems to be a dearth of WCs in Singapore, even after several tries of relentless searching, it was hard to find free-standing WCs that would look a bit less pedestrain. Unfortunately, we didn't have the option of using wall-hung WCs (or fortunately, given that those are at least $1000 a set) but we did use them for another project and there, there seems to be a consensus of brands around Geberit and Liebherr flushing systems. WCs themselves are actually a lot less important than the all-important flushing system, because the bowl is just a conduit. So we didn't stinge on flushing systems (I grew up living in an old house where the flushing systems were screwed up by a poor contractor, so I know first-hand that this is the first thing to go and very painful to live with), but tried to economize on the WCs.
For the wall-hung WCs, we were in touch with the excellent Aamor Pte Ltd in the Cendex Center at Lower Delta Road, who are a wholesaler/distributor with a wide range of product, without retail margin. Since we were using concealed systems, we paid up for the flushing mechanisms (which are still a great deal cheaper here than at other stores) but chose Oxo and Geoceram WCs ($200-300), which were still very streamline, as opposed to splurging on upscale brands like Duravit ($600-900).
For the unit WCs, we went to Tapz Gallery primarily because they had a good package, which involves buying a WC and getting a choice of basin for a $50 top up. This wound up being a lot more cost effective than the clearence basin sales Hong Soon experience which you've already heard me whine about. Each set, inclusive of all the additional fittings and valves, ranged between $230-330 depending on the WC chosen. Without the additional basin, most WCs there were about $180-220. When shopping around, I realized that (a) that's about as cheap as WCs go and (b) other stores also have packages and each store may have distinct brands of WCs, so definitely shop around and be aware of stock issues as they do tend to hold small inventory.
Most of the basins in Balestier and in Hong Soon are unbranded Trendz basins- I found this brand and factory in China and do you know, you can have anyone's name (ie. even your own) printed on the basins? So don't be fooled, they may have made up random brand names but most of them are exactly the same generic product. There may be a few recognizable names like the Imperial, Johnson Suisse and Toto, I have no idea if they are really different though I'm sure the brand and store will tell you they are. For the basins that we did not get on this promotion at Tapz, we bought them from Aamor, again, the less pricey $160 Oxo and Geoceram rather than the $600 Scarbarah and $900 Duravit. If you are wondering how basins can possibly cost so much, both the Geoceram and Duravit were the same size and shape (rectangular semi-recessed basins), however, the Duravit had narrower and shaper edges, so the seams of the rectangle were thinner and more defined.
Mixers, Taps and ShowersFor the basin mixers, bath mixers and shower sets, we quickly discovered that shower heads are relatively cheap (sometimes as low as $30) and even basin taps may not be that expensive but then the stores will charge you a ridiculous price on the mixers. We had been frequently warned by other house owners and renovators not to cheap out on tap fittings because they leak and corrode, causing a series of problems and then you have to replace them anyway. In one of the stores, Home and Bathroom Building Products on 566 Balestier, we got a good lesson in looking for bathroom appliances, they told us to look for (a) weight, which was often correlated to the quality of the fittings and also would determine how tightly the tap could be shut (b) a reputable name and also country of manufacture (c) rubber stoppers at the base of the spouts, for easy cleaning, as opposed to wire mess which will rust and (d) brass interiors to the fittings, rather than plastic which corrodes with hot water.
We also discovered at the store, that Hansgrohe was doing an aggressive promotion to break into the Asian markets (which I think they've been very successful at) and gain an upper hand on older brother Grohe. The trick is, basic lines like their Focus E2 and S2 series (<$300 for a set of 3 fittings), were discounted to very attractive prices, while the newest lines, like the Axor Hansgrohe fittings, were ridiculously expensive (think $800-1600 for a set of 3). The price that we were quoted for Home and Bathroom was $316 for a set of basin mixer, shower mixer and shower set with head and rod, then $356 for the same set with a bath rather than shower mixer (two spouts, rather than only one for the shower hose).
The price at Tapz Gallery for a similar mix-and-match set of unbranded or China brand product, was also more than $300 (primarily because of the shower mixer, for which they charged $116), so amazingly, the far superior Hansgrohe package was actually better value. One of our friends who owns a bar and had used Contractor T. commented enviously on the Hansgrohe fittings but when he found out how much they cost, he was shocked as he had paid far more for his fittings. Of course, these are not the ultra-modern-cool state-of-the-art Hansgrohe product that you see in luxury hotels but I do think they are far more sleek than what is commonly available and because they have a very wide range, you can always swop out or upgrade the shower heads to Raindance showers if you like. As a plus, they come with warranties and great after-sales service.
I went back to Aamor and found that for the same set, they charged $295 for the shower mixer set and $316 for the bath mixer set. As a bonus, their other products came with a 30% discount, which was at least similar to Balestier and they deliver. Best find yet.